Products

Lubrication Technology, lubricants, and process expertise for industrial sheet metal forming.

Service

From consulting to equipment service: We’re here to support you with all aspects of your Raziol solution.

Company

Everything about Raziol: Information about our company, careers, trade shows and events, and downloads.

Tool lubrication

For the precise application of lubricant to forming and machining tools. A variety of spray patterns, adjustment options, and spray head extensions allow for customization based on the specific application.

Spray lubrication systems

Apply lubricant precisely, tailored to the tool and manufacturing process

When lubricating tools, it is essential to apply the lubricant in the required amount precisely to the intended location. Different tool geometries, hard-to-reach areas, and varying requirements for lubricant quantity and spray pattern present particular challenges.

Raziol lubrication points use precision coaxial spray heads to ensure precise and repeatable lubricant application. Depending on the model, the application volume, spray parameters, and spray pattern can be adjusted to suit the specific application. A variety of nozzle attachments and flexible spray head extensions expand the range of applications, from pinpoint tool lubrication to integration into spray chambers.

Benefits at a Glance

  • Targeted lubricant application to specific tool areas
  • Adjustable spray parameters and application rates for various process requirements
  • Different spray patterns thanks to a variety of nozzles and attachments
  • Reproducible Lubricant Application
  • Flexible positioning thanks to an articulated mount with a magnetic base and model-specific spray head extensions
  • Use in non-cutting and cutting machining processes

Comparison of Raziol Lubrication Points

Lubrication pointSpray Pattern / Spray AngleAdjustment OptionsSpecial Features
ST LAMA-3000 / VL15° omnidirectional / 5° omnidirectional (VL)Adjustable Spray ParametersVL with flexible spray head extensions ranging from 40 to 800 mm
ST LAMA-4000 / VA5° omnidirectional spray pattern; additional spray patterns available with attachmentsDifferent nozzle attachments and nominal nozzle diametersAdapter for wide-angle nozzles (90°); extensions from 50 to 200 mm
ST CD-100 BS / BSD90° Wide BeamAdjustable greasing width and manual oil volume adjustmentBS with separate air, BSD with combined spray and wide-angle air
ST CD 95 / 10590° flat spray pattern; additional spray patterns available with attachmentsVarious nozzle inserts and grid-type screw connectionsCompact design; nozzle orifices ranging from 0.5 to 1.5 mm (CD 95) or 0.5 mm (CD 105)
ST DUSTY-2000 / VL15° omnidirectional beamLubricant flow rate and spray air can be adjusted directly at the nozzle headVL with flexible spray head extensions ranging from 40 to 800 mm

Lubrication Points ST LAMA-3000 / VL

The LAMA-3000 and LAMA-3000/VL lubrication stations enable precise lubricant application to forming tools and cutting tools. The precision coaxial spray head can be precisely positioned using an articulated mount with a magnetic base.

For flexible adjustment of the spray pattern, the LAMA-3000/VL model is available with flexible spray head extensions in various lengths. This allows the lubricant to be applied precisely to the desired location on the tool.

Areas of Application

  • Non-cutting processes: deep drawing, punching, bending, roll forming, and thread forming
  • Machining: Drilling and Milling
  • Tool and Minimal Lubrication: Precise Application of Low- to Medium-Viscosity Lubricants

Technical Specifications and Features

  • 15° omnidirectional spray angle for the LAMA-3000 and 5° for the LAMA-3000/VL
  • Minimum application amount: less than 0.05 g per pulse
  • Suitable for low- to medium-viscosity lubricants
  • Flexible Adjustment of Spray Parameters
  • High reproducibility of lubricant application
  • 2-way articulated mount with magnetic base (Ø 63 mm)
  • Three separate connections for lubricant, spray air (swirl air), and control air
  • Flexible precision spray head extensions ranging from 40 to 800 mm are available for the LAMA-3000/VL; special versions are also available for sharp bends

Product Information & Advice

Would you like to determine which lubrication point is suitable for your application? Our representatives will assist you with the selection and technical design.

Personalized Product Advice

Lubrication Points ST LAMA-4000 / VA

The ST LAMA-4000 and ST LAMA-4000 VA lubrication stations consist of a precision coaxial spray head with an articulated mount and a magnetic base for precise positioning of the spray pattern. Different nozzle attachments allow the spray pattern to be adjusted to the specific application. Various nominal nozzle diameters enable tools to be lubricated with different amounts of oil.

Areas of Application

  • Non-cutting processes: deep drawing, punching, bending, roll forming, and thread forming
  • Machining: Drilling and Milling
  • Tool and Minimal Lubrication: Targeted Application of Low- to Medium-Viscosity Lubricants

Technical Specifications and Features

  • Precision coaxial spray head for targeted lubricant application with a 5° omnidirectional spray angle
  • Minimum application rate: less than 0.05 g per pulse or per square meter
  • Suitable for low- to medium-viscosity lubricants
  • Different nozzle attachments for adjusting the spray pattern (75° ring spray or 90° wide spray)
  • Precise Adjustability of Spray Parameters
  • High reproducibility of lubricant application
  • Three separate connections for lubricant, spray air (swirl air), and control air
  • Precision spray head extensions are available in various lengths ranging from 50 to 200 mm

Product Information & Advice

Would you like to determine which lubrication point is suitable for your application? Our representatives will assist you with the selection and technical design.

Personalized Product Advice

Lubrication Points ST CD-100 BS / BSD

The CD-100 lubrication points are equipped with a precision coaxial spray head featuring a 90° wide-angle spray pattern and enable the targeted application of low- to high-viscosity lubricants. The wide-angle air stream flattens the originally circular spray pattern. The lubrication width per nozzle can be adjusted to the specific application by setting the air pressure.

The two models differ in their air delivery: While the CD-100 BS features separate spray and wide-jet air streams, these are combined in the CD-100 BSD. Both variants enable highly reproducible lubricant application and are suitable for both tool lubrication and use in spray chambers, for example as nozzle bars.

Areas of Application

  • Non-cutting processes such as deep drawing, punching, bending, roll forming, and thread forming
  • Machining operations such as drilling and milling
  • Tool Lubrication and Minimum Quantity Lubrication
  • Used in spray chambers, mounted as a nozzle bar

Technical Specifications and Features

  • Precision coaxial spray head with a 90° wide-angle or flat-spray angle
  • Minimum application amount: less than 0.05 g per pulse
  • Suitable for low- to high-viscosity lubricants
  • Adjustable greasing width by regulating the wide-jet air pressure
  • Wide core beam area
  • Excellent adjustability of the spray parameters
  • Excellent reproducibility of lubricant application
  • Manual oil flow adjustment via a precision detent throttle with 40 detent positions per revolution

Product Information & Advice

Would you like to determine which lubrication point is suitable for your application? Our representatives will assist you with the selection and technical design.

Personalized Product Advice

Lubrication Points ST CD 95 / 105

The CD 95 and CD 105 lubrication stations are equipped with a precision coaxial spray head featuring a 90° flat spray angle, enabling precise, highly reproducible lubricant application. Different nozzle inserts and attachments allow the lubricant volume and spray pattern to be adjusted to suit the specific application.

Thanks to their compact installation dimensions, these lubrication points are suitable both for tool lubrication and for use in spray chambers, for example as nozzle bars.

Areas of Application

  • Non-cutting processes such as deep drawing, punching, bending, roll forming, and thread forming
  • Machining operations such as drilling and milling
  • Tool Lubrication and Minimum Quantity Lubrication
  • Used in spray chambers, mounted as a nozzle bar

Technical Specifications and Features

  • Precision coaxial spray head with a 90° flat spray angle
  • Excellent adjustability of the spray parameters
  • Excellent reproducibility of lubricant application
  • Minimum installation dimensions
  • Nozzle inserts with orifices of 0.5 mm, 1.0 mm, and 1.5 mm are available for the CD 95, and 0.5 mm for the CD 105
  • Various nozzles for different spray patterns (wide-angle, circular, and swirl nozzles)
  • Screw-type adjustment mechanism for regulating the oil flow

Product Information & Advice

Would you like to determine which lubrication point is suitable for your application? Our representatives will assist you with the selection and technical design.

Personalized Product Advice

Lubrication Points ST DUSTY-2000 / VL

The DUSTY-2000 lubrication points are equipped with a precision coaxial spray head featuring a 15° omnidirectional spray angle, enabling precise lubricant application. The lubricant flow rate and spray air can be adjusted directly at the nozzle head to suit the specific application.

The DUSTY-2000/VL model also allows for the use of flexible spray head extensions in various lengths. This enables precise lubricant application even in hard-to-reach areas of the tool.

Areas of Application

  • Tool Lubrication and Minimum Quantity Lubrication
  • Non-cutting processes such as deep drawing, punching, bending, roll forming, and thread forming
  • Machining operations such as drilling and milling

Technical Specifications and Features

  • Precision coaxial spray head with a 15° omnidirectional spray angle
  • Direct adjustment of the lubricant flow and spray air at the nozzle head
  • Common connection for spray air (vortex air) and control air
  • Flexible, precision spray head extensions ranging from 40 to 800 mm for the DUSTY-2000/VL
  • Diameter of the spray head extensions: 4 mm; 5 mm at the tip

Product Information & Advice

Would you like to determine which lubrication point is suitable for your application? Our representatives will assist you with the selection and technical design.

Personalized Product Advice

Trade Shows & Events

Meet Our Experts in Person

Whether it’s a trade show, technology day, or industry event: Learn about our solutions for Lubrication Technology and metal forming lubricants through direct interaction. You’ll find all the latest dates on our events page. For personalized application advice, you can also contact our representatives directly.

Other Solutions

Discover our product portfolio

Discover additional product categories and solutions for a variety of needs in sheet metal processing and metal forming.

Spray lubrication systems

Spray lubrication systems

For the contactless application of lubricants to web material, circuit boards, or molded parts. Raziol spray lubrication systems ensure uniform, reliable lubrication—even under complex conditions.

Roller Lubrication Systems

Roller Lubrication Systems

Raziol roller lubrication systems enable oil-mist-free lubrication of strip material, blanks, and rounds in continuous or automated manufacturing processes. The lubricant is applied directly to the material surface via lubrication rollers.

Cleaning Technologies

Cleaning Technologies

For clean surfaces prior to the forming or oiling process. Raziol cleaning systems remove contaminants from sheet metal and strip material, helping to ensure stable processes, longer tool life, and high component quality.

Dosing systems

Dosing systems

For the controlled metering of metalworking fluids in lubrication systems. The metering units support on-demand fluid delivery and ensure consistent process conditions.

Tribological Test Systems & Accessories

Tribological Test Systems & Accessories

For reproducible testing and measurements related to lubricant application, friction behavior, and lubricant film thickness. These systems support development, process design, and quality assurance in sheet metal forming.

Raziol at a Glance

Learn more about us

Whether you're looking for company information, references, expertise, or services: In this section, you'll find more detailed information about Raziol, our solutions, and the services we offer to meet your technical needs.

References

Insights into completed projects and real-world applications: Our references show how Raziol solutions are used in various production environments.

Service

From technical support to long-term assistance: Our service section brings together information on services, contacts, and support options related to your Raziol solution.

Company

Practical information about Raziol: Learn more about the latest news, trade show dates, career opportunities, business hours, and holidays.

Knowledge

Technical information on Lubrication Technology, tribology, and lubrication in metal forming: Gain insights into the fundamentals and current topics in the industry.

Contact us

* Required field