Dosing systems
Precise Lubricant Dosing for Reliable Manufacturing Processes
The control units, developed and manufactured in-house by Raziol, enable reliable, demand-based control of oiling and greasing systems. By precisely controlling and metering lubricants based on the press stroke or material feed rate, they ensure uniform lubricant application, reduce unnecessary lubricant consumption, and contribute to consistent process quality.
Depending on the application, Roller lubricator, spray nozzles, spray sectors, or individual lubrication points can be controlled individually. Adjustable dosing parameters and storable lubrication programs allow for flexible adaptation to different production requirements. Monitoring functions and the option to connect to refill systems support trouble-free plant operation and increase process reliability.
Benefits at a Glance
- Control technology developed and manufactured in-house, tailored to Raziol lubrication systems
- Lubricant metering tailored to requirements based on the press stroke or material feed rate
- Precise control of roller conveyor lubricators, spray nozzles, or individual lubrication points
- Customizable dosing parameters for various production requirements
- Storing and retrieving product-specific lubrication programs to reduce setup times
- Monitoring of Lubricant Supply and Equipment Conditions for Early Fault Detection
- User-friendly interface and flexible integration into existing manufacturing processes
Control System for a Lubrication Point
ELS 4000 Control Electronics
The ELS 4000 microprocessor-controlled electronic control unit is used to control roller chain lubricators and spray nozzles. Individually adjustable switching parameters are used to control oil and air valves based on the press stroke, enabling lubricant metering tailored to actual needs. In the configuration menu, you can easily switch between control modes for the Roller lubricator and spray nozzles.
Areas of Application
- Greasing of materials using Roller lubricator
- Tool Lubrication Using Spray Nozzles
- Dosage for each lubrication point
Technical Specifications and Features
- Valve actuation based on the machine cycle
- Individually adjustable cycle counter, as well as adjustable delay and lubrication times
- Color LCD touchscreen with menu options in German and English
- 16 program memory locations for product-specific parameters
- Level monitoring for pressure vessels with automatic refill from the storage drum
- Machine Stop Signal When Medium Levels Are Low
- Mains voltage of 100–240 V AC, 50–60 Hz
- Maximum output power of 12 W per output with a total load of no more than 20 W
- Clock source connection via proximity switch (PNP, NAMUR), external DC voltage, or dry contact
- Aluminum surface-mount enclosure measuring 220 × 130 × 70 mm
- Connection via M12 connector
Product Information & Advice
Here you will find all relevant documents and additional information about this product. We would be happy to assist you in designing your application and provide personalized advice on suitable solutions.
Technical Inquiry
Personalized Product Advice
Control unit for up to four lubrication points
EBAD 4000 KL Control Electronics
The EBAD 4000 KL control unit is designed to control Raziol lubrication systems equipped with lubrication points, roller conveyor lubricators, spray nozzles, and spray sectors. It enables continuous, feed-dependent lubrication with separate metering for up to four lubrication points. Each lubrication point can be individually configured as a “ Roller lubricator ” or spray nozzle control.
Areas of Application
- Roller lubricator, for example, for the top and bottom surfaces
- Tool Lubrication Using Spray Nozzles
- Control of Lubrication Points and Spray Sectors
- Separate metering for up to four lubrication points
Technical Specifications and Features
- Valve control based on the machine cycle, with an adjustable cycle counter and adjustable delay and lubrication times
- Menu navigation via color touchscreen
- Four separately configurable lubrication points with independent metering
- Four separate clock inputs
- Oil flow monitoring by connecting an external oil flow monitor to each lubrication point
- Level monitoring for up to two pressure vessels, either in parallel or alternately with automatic switching
- Controlling an automatic refill system from the storage tank to ensure uninterrupted production
- Machine stop signal, e.g., when the medium supply is low
- Connection for a higher-level control system with program selection for 100 lubrication settings
- Signal inputs with 24 V DC
- Connection via the terminal compartment
- Surface-mount enclosure with dimensions of 240 × 267 × 120 mm
Product Information & Advice
Here you will find all relevant documents and additional information about this product. We would be happy to assist you in designing your application and provide personalized advice on suitable solutions.
Technical Inquiry
Personalized Product Advice







