Fine-cutting oils
For large cutting depths, high tool loads, and clean cut surfaces.
Catalog Assortment
Stable processes at high cutting thicknesses
During precision cutting, high compressive and shear forces act on the tool and workpiece. Thick materials, high-strength materials, complex component geometries, and high requirements for cut surface quality further increase the tribological load. Without a stable lubricating film, tool wear, weld buildup, and quality fluctuations can increase.
Fine-blanking oils are designed to handle these demanding conditions and help:
- reliable lubrication and pressure absorption in the cutting gap
- clean cut surfaces
- the reduction of friction, wear, and the tendency to weld on
- longer tool life and greater process reliability
- machining of large wall thicknesses and demanding material grades
For thick cuts
Raziol Fine-Cutting Oils
Raziol fine-blanking oils are designed for demanding fine-blanking and punching processes involving high mechanical loads. Depending on the product variant, tool, and material grade, material thicknesses of up to 12 mm can be processed. The oils’ high lubricity and balanced additive formulation help protect against wear and contribute to longer tool life.
Application
- Manufacturing of sophisticated fine-blanking parts with high standards for cut quality and process reliability
- Fine-blanking and punching processes with cutting thicknesses of up to 12 mm, depending on the product, tooling technology, and material grade
- Machining of Steel, Stainless Steel, and Aluminum
To ensure precise lubricant application, Raziol chlorinated forming oils (depending on the specific process requirements) can be applied using suitableroller-chain lubricatorsor spray systems.
Features
- High cutting performance thanks to additives specifically formulated for demanding fine-cutting processes
- Good wetting and adhesion properties for a reliable lubricating film
- Base oils with low aromatic content to reduce exposure in the workplace
- The additives used do not contain any silicone- or chlorine-based ingredients in their formulations
Raziol Fine-Cutting Oils Product Overview
| Product | Color | Kinetic viscosity at 40°C [mm²/s] | Materials | Performance |
|---|---|---|---|---|
| CLF 125 F | brown | 120–140 | Steel, aluminum, stainless steel | ⬤⬤⬤⬤ |
| CLF 150 F | yellow | 160 | Steel, aluminum, stainless steel | ⬤⬤⬤⬤ |
| CLF 250 F | green | 250 | Steel, aluminum, stainless steel | ⬤⬤⬤⬤⬤ |
Product Information & Advice
Here you will find more information about Raziol fine-blanking oils. We are happy to assist you in selecting a suitable product by helping you evaluate the material, process, and application-specific requirements.
Application-Related Inquiry
Data Sheets (SDB/TDB)
Personalized Product Advice
