Oil Mist Extraction Systems
For the targeted extraction and filtration of oil and emulsion mists in spray lubrication systems. A variety of designs allows for customization to meet the specific requirements of individual systems.
Spray lubrication systems
Targeted extraction and filtration of oil and emulsion mist
Industrial spray lubrication can generate fine oil and emulsion mists that, without proper extraction, can spread throughout the plant environment. Effective collection and filtration of aerosol-laden air is therefore an important component of clean production conditions.
Raziol extraction systems are specifically designed for use with spray lubrication systems. Depending on space constraints, lubrication width, and required airflow, various system configurations are available that can be integrated into existing or new system designs. In addition, custom-engineered solutions allow for precise adaptation to individual requirements and system conditions.
Benefits at a Glance
- Targeted collection and filtration of air containing oil and emulsion mist at spray lubrication systems
- Reducing the spread of oil and emulsion mists in the production environment
- Different designs for various space constraints and system configurations
- Selection of suitable extraction systems based on the lubrication width and required airflow rate
- Monitoring of filter condition and easy access for maintenance work
Flexible Setup
Side-mounted exhaust system
The extraction system shown here is designed to extract and filter air containing aerosols with oil or emulsion mist. It can be flexibly positioned next to the spray booth or work platform and is suitable for various spray booth sizes and oiling widths.
Large filter surfaces help ensure that appropriate maintenance intervals are followed. Depending on your requirements, three models with different fine-filter combinations are available.
Areas of Application
- Extraction and Filtration of Air Containing Oil and Emulsion Mists
- Use with spray chambers of various sizes and lubrication widths
- Installation next to spray booths or work platforms
Key Features and Benefits
- Digital or optical differential pressure gauge for monitoring filter condition
- Depending on the model, several filter stages arranged in series
- 99.95% separation efficiency for particle sizes ranging from 0.1 to 0.3 µm
- Noise level below 76 dB(A)
- Filter maintenance through an access door on the front of the filter housing
- Collection tank with level monitoring
Technical Specifications for the Exhaust Systems Shown Here (Base Model FG-SA 2000 3 F9)
| Technical Feature | Design |
|---|---|
| Volume flow | 500–2,000 m³/h |
| Electrical Power | 0.37–2.2 kW |
| Prefilter | Baffle plate and 3 demisters |
| Fine filter | F9 (24 m² filter area) |
| Optional upgrade with H13 filter | F9 (24 m²) + H13 |
| Optional extension with activated carbon | F9 (24 m²) + F7 + activated carbon in bulk |
| Dimensions of the Basic Model (L × W × H) | 1,140 × 950 × 2,071 mm |
| Lineup | in the hallway |
Product Information & Advice
Here you will find all relevant documents and additional information about this product. We would be happy to assist you in selecting and designing an extraction system that is suitable for your application.
Technical Inquiry
Personalized Product Advice
Space-saving installation
Surface-Mounted Exhaust System
The surface-mounted extraction system is a mechanical oil and emulsion mist separator designed to extract and filter air containing aerosols. Thanks to its compact, space-saving design, it is mounted directly on the spray chamber and is suitable for lubrication widths of up to 1,900 mm.
The exhaust system features two filter stages arranged in series, consisting of a pre-filter and a fine filter. Depending on the required airflow, three system variants with different filter areas are available.
Areas of Application
- Extraction and Filtration of Air Containing Oil and Emulsion Mists
- For use with spray chambers with lubrication widths of up to 1,900 mm
- Space-saving installation directly on the spray chamber
Key Features and Benefits
- Compact and space-saving design
- Digital or optical differential pressure gauge for monitoring filter condition
- Two filter stages arranged in series (pre-separator and fine filter)
- Noise level below 76 dB(A)
- Filter maintenance through an access door on the front of the filter housing
- Collection tank for the separated return oil
Technical Specifications for Surface-Mounted Exhaust Systems (Base Model FG-LA 300 3 F9)
| Technical Feature | Design |
|---|---|
| Volume flow | max. 300 m³/h |
| Electrical Power | 0.75 kW |
| Prefilter | Baffle Plate and Demister |
| Fine filter | F9 (1 × 2.7 m² filter area) |
| Dimensions of the Basic Model (L × W × H) | 1,055 × 508 × 791 mm |
| Assembly | resting on the spray chamber |
| Variant 2 (FG-LA 600 3 F9) | Differences from the standard model: Airflow: 300–600 m³/h Fine filter: F9 (2 × 2.7 m² filter area) Dimensions (L × W × H): 1,385 × 508 × 791 mm |
| Variant 3 (FG-LA 900 3 F9) | Differences from the standard model: Airflow: 300–900 m³/h Electrical power: 1.5 kW Fine filter: F9 (3 × 2.7 m² filter area) Dimensions (L × W × H): 1,730 × 508 × 791 mm |
Product Information & Advice
Here you will find all relevant documents and additional information about this product. We would be happy to assist you in selecting and designing an extraction system that is suitable for your application.
Technical Inquiry
Personalized Product Advice
Compact & space-saving design
Surface-mounted extraction system with base frame
The floor-mounted extraction system with base frame is a mechanical oil and emulsion mist separator designed to extract and filter air containing aerosols. Thanks to its compact and space-saving design, it is suitable for lubrication widths of up to 1,900 mm and is installed on the shop floor using a base frame.
The exhaust system features two filter stages arranged in series, consisting of a pre-filter and a fine filter. Depending on requirements, two models are available, including a version with additional activated carbon filtration.
Areas of Application
- Extraction and Filtration of Air Containing Oil and Emulsion Mists
- For use with lubrication widths of up to 1,900 mm
- Floor-standing model with base frame
Key Features and Benefits
- Compact and space-saving design
- Digital or optical differential pressure gauge for monitoring filter condition
- Two filter stages arranged in series (pre-separator and fine filter)
- Noise level below 76 dB(A)
- Filter maintenance through an access door on the front of the filter housing
- Collection tank for the separated return oil
Technical Specifications for Surface-Mounted Exhaust Systems with Base Frame (Base Model FG-LA 700 3 F9)
| Technical Feature | Design |
|---|---|
| Volume flow | max. 700 m³/h |
| Electrical Power | 0.75 kW |
| Prefilter | Baffle Plate and Demister |
| Fine filter | F9 (1 × 3.3 m² filter area) |
| Dimensions of the Basic Model (L × W × H) | 1,391 × 451 × 1,360 mm |
| Lineup | in the hallway |
| Variant 2 (FG-LA 700 4 AK) | Differences from the standard model: Fine filter: F9 (2 × 3.3 m² filter area) Additional filtration: Activated carbon in bulk Dimensions (L × W × H): 1,391 × 451 × 1,575 mm |
Product Information & Advice
Here you will find all relevant documents and additional information about this product. We would be happy to assist you in selecting and designing an extraction system that is suitable for your application.
Technical Inquiry
Personalized Product Advice
